Max 500mm Wide Aluminum Radiator Fin Machine Stamping 80 SPM Wavy Fin
Main Application
The aluminum radiator fin machine is used to produce the following fins:
straight and flat fins,serrated fins, perforated fins, wavy fins, louvered fins and others.
Supply Scope
| NO. | Item | Q’ty |
| 1 | Stamping Type Radiator Fin machine body | 1 set |
| 2 | Decoiler | 1 set |
| 3 | Lubrication device | 1 set |
| 4 | Servo cutter | 1 set |
| 5 | Collection table | 1 set |
| 6 | Tool box | 1 set |
| 7 | Accessories | Several |
Introduction to Main Units
The stamping type aluminum radiator fin machine is mainly comprised of the decoiler, the
Automatic Decoiler
The automatic decoiler is an important part of the fin press line. It can start or stop decoiling automatically.
a) put the aluminum coil on the decoiler, and then lock the blocking ring between each two coils.
b) When the fin press machine starts to work, the decoiler starts also.
c) The decoiler starts or stops automatically based on the extreme upper and lower position of the aluminum strip sensed by the photoelectric switch.
Oil lubrication device
The lubrication device is to lubricate the aluminum strip before entering the stamping fin machine.
Stamping Aluminum Radiator Fin Machine
The aluminum fin machine is used to produce flat fins for heat exchangers by the mechanical pressing force.
Cutting Unit
The servo cutting unit employs the servo motor to control the feeding of the material, and the air pump controls the cutter to cut the fins. The user can set the fin width and fin quantity per cut.
Technical Parameters of Fin Machine
| Control system power (KW) | 3 |
| power supply | 3P;380V±10%;50Hz±2% (could be customized) |
| Machine accuracy | Levelness of highest point of mold table | mm | ≤0.03 |
| Levelness of lowest point of lower mold table | mm | ≤0.03 |
| Levelness of mold table at ascent | mm | ≤0.03 |
| Levelness of mold table at descent | mm | ≤0.03 |
| Vertical stroke | mm | 14 |
| Punching force | KG | 7500 |
| Fin specification | Fin (height*pitch) | mm | Customized |
| Max fin width | mm | 500 |
| Max fin height | mm | 12 |
| Min fin height | mm | 1 |
| Machine speed | Inverter control | Times/min | 10～85 |
| Overall dimension | L | mm | 1320 |
| W | mm | 750 |
| H | mm | 1550 |
| Noise | | db(A) | 60 |
| Weight | | kg | 2000 |
Picture of Servo Cutter of Stamping Fin Machine
Product Tags:
|
|
Max 500mm Wide Aluminium Fin Press Machine Stamping 80 SPM Wavy Fin Low Noise Images
|
